|
TL-R400S
High-performance short-depth rackmount SATA 6GB/s JBOD storage enclosure
TL-R400S Rackmount JBOD storage enclosure allows you to back up and expand your QNAP NAS, Windows® and Ubuntu® computers and servers. The TL-R400S features four 3.5-inch SATA 6Gb/s drive bays, the shallow rack design is perfect for installing the TL-R400S in a compact rack, or in areas with a lot of cabling. TL-R400S comes with a QXP PCIe card for connecting the enclosure using a SFF-8088 (or SFF-8644) cable. It provides reliable read/write performance for smooth storage and backup tasks.
Notes:
1. QNAP recommends following the standard procedure for connecting or disconnecting the TL-R400S. For more information, please see the TL-R400S user manual.
2. The TL-R400S can only be used as an individual storage pool or volume on the NAS. Its storage pool or volume cannot be combined into the connected NAS. NAS applications cannot be installed on the TL-R400S.
3. The TL-R400S only supports QNAP NAS running on QTS 4.4.2 (or above) or QuTS hero operating system.
4. Users can purchase the optional RAIL-B02 rail kit to deploy the TL-R400S in a 19-inch rack following the ANSI/EIA-RS-310-D standard.
1
High-capacity TL SATA JBOD not only can expand NAS storage, but also Windows® and Ubuntu® computers and servers.
2
SFF-8088 (or SFF-8644) connection cable supports four SATA 6Gb/s channels per cable (24Gb/s in total) and provides faster data transfer speeds than eSATA and USB.
3
The short depth rackmount NAS is perfectly suited for installation in a compact rack, or places with a lot of cabling.
TL-R400S
Drive Bay : 4 x 3.5-inch SATA 6Gb/s, 3Gb/s
Drive Compatibility : 3.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
Audio Alert On/Off Switch : Yes
Form Factor : 1U Rackmount
Host Interface : 1 x SFF-8088
LED Indicators : HDD 1-4, Status, Link, Fan error
Buttons : Power switch
Dimensions (HxWxD) : 43.9 × 438.9 × 291.1 mm
Excludes ear hook and the protruding part of the Power Supply Unit.
Weight (Net) : 3.98 kg
Weight (Gross) : 5.38 kg
Max. number of HDDs/SSDs supported : 4
Hard Drive Type : 3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
Operating Temperature : 0 - 40 °C (32°F - 104°F)
Storage Temperature : -20 - 70°C (-4°F - 158°F)
Relative Humidity : 5-95% RH non-condensing, wet bulb: 27°C (80.6°F)
Power Supply Unit : 100W PSU, 100 - 240V
Power Consumption: Operating Mode, Typical : 25.07 W
Tested fully populated with Seagate ST6000NM0024 hard drives.
Fan Mode Switch : (Auto, high, medium, low)
Fan : 2 x 40mm, 12VDC
System Warning : Buzzer
Kensington Security Slot : Yes
Others
|
