|
TS-h3088XU-RP
Modernize your IT using the ZFS-based, 25GbE-ready all-flash storage with high performance, high capacity, and low latency
The 2U rackmount TS-h3088XU-RP provides a cost-efficient all-flash storage solution for tackling I/O-intensive and latency-sensitive enterprise applications. With 30 drive bays for 2.5-inch SATA 6Gb/s SSDs, built-in dual-port 25GbE SFP28 SmartNIC, four 2.5GbE LAN ports, PCIe expandability, and up to petabyte-scale storage capacity, the TS-h3088XU-RP satisfies uncompromising performance demands in virtualization, modern data centers, hybrid/multi-cloud applications, mission-critical backup/restore tasks, and file servers that allow thousands of simultaneous connections. The QuTS hero operating system features ZFS data reduction and SSD optimization technologies to get the utmost performance, lifespan, and efficiency from your SSD investments!
intel-xeon_Ehdmi
Optimal SSD performance
Inline data deduplication and compression, Pool Over-provisioning, and TRIM maximize SSD performance and lifespan.
2 x 25GbE SFP28 ports
Dual 25GbE SFP28 and quad 2.5GbE RJ45 high-speed connectivity accelerate virtualization, intensive file access, media file transfer, and large backup/restoration tasks.
3 x PCIe Gen 3 slots
PCIe Gen 3 slots allow for installing 5/10/25/40GbE adapters, QM2 cards, or Fibre Channel cards to increase application performance.
Virtualization applications
Supports virtualization storage and hosting virtual machines and containerized apps.
Cloud storage gateway
Cloud storage gateways realize hybrid cloud applications by working with the cache space reserved on NAS to ensure low-latency data access to the cloud.
Petabyte-scale storage
Scalable design to grow with your business by connecting up to sixteen SAS 12Gb/s TL-1620Sep-RP expansion enclosures to attain petabyte-scale storage capacity of 286 disk drives.
TS-h3088XU-RP-W1250-32G
CPU : Intel® Xeon® W-1250 6-core/12-thread processor, up to 4.7 GHz
CPU Architecture : 64-bit x86
Floating Point Unit : Yes
Encryption Engine : (AES-NI)
Hardware-accelerated Transcoding : Yes
System Memory : 32 GB UDIMM DDR4 ECC (2 x 16 GB)
Maximum Memory : 128 GB (4 x 32 GB)
Memory Slot : 4 x UDIMM DDR4
For dual-DIMM configurations, you must use a pair of identical DDR4 modules.
Flash Memory : 5GB (Dual boot OS protection)
Drive Bay : Front: 24 x 2.5-inch SATA 6Gb/s, 3Gb/s
Rear: 6 x 2.5-inch SATA 6Gb/s, 3Gb/s
The system is shipped without HDD.
For the HDD compatibility list, please visit https://www.qnap.com/compatibility/
Drive Compatibility : 2.5-inch bays:
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
Hot-swappable : Yes
SSD Cache Acceleration Support : Yes
2.5 Gigabit Ethernet Port (2.5G/1G/100M) : 4 (2.5G/1G/100M)
5 Gigabit Ethernet Port (5G/2.5G/1G/100M) : Optional via an adapter
10 Gigabit Ethernet Port : Optional via an adapter
25 Gigabit Ethernet Port : 2
Wake on LAN (WOL) : Yes
Only the 2.5GbE port
Jumbo Frame : Yes
PCIe Slot : 3
Slot 1: PCIe Gen3 x8 or x4
Slot 2: PCIe Gen3 x4
Slot 3: PCIe Gen3 x4
*Slot 1 is preinstalled with a 25GbE network adapter. Please reserve this slot for the 25GbE adapter for the best performance.
**Slot 1 provides the width of PCIe Gen3 x8 when Slot 2 is not in use, and provides the width of PCIe Gen3 x4 when Slot 2 is in use.
Card dimensions for PCIe slot 1:200 x 68.9 x 28.76 mm / 7.87 x 2.71 x 1.13 inches.
Card dimensions for PCIe slot 2:200 x 68.9 x 18.76 mm / 7.87 x 2.71 x 0.74 inches.
Card dimensions for PCIe slot 3:200 x 68.9 x 18.76 mm / 7.87 x 2.71 x 0.74 inches.
Wider cards can be installed if the next PCIe slot will not be used.
USB 3.2 Gen 2 (10Gbps) Port : 2 x Type-C USB 3.2 Gen 2 10Gbps
2 x Type-A USB 3.2 Gen 2 10Gbps
HDMI Output : 1, HDMI 1.4b (up to 4096 x 2160 @ 30Hz)
Form Factor : Rackmount
LED Indicators : HDD, Status, 10 GbE, LAN, storage expansion port status
Buttons : Power, Reset
Dimensions (HxWxD) : 88.3 × 481.07 × 515.02 mm
Excludes ear hook and the protruding part of the Power Supply Unit.
Weight (Net) : 12.26 kg
Weight (Gross) : 17.87 kg
Operating Temperature : 0 - 40°C (32°F - 104°F)
Storage Temperature : -20 - 70°C (-4°F - 158°F)
Relative Humidity : 5-95% RH non-condensing, wet bulb: 27°C (80.6°F)
Power Supply Unit : 550W(x2), 100-240V
Power Consumption: HDD Sleep Mode : 129.57 W
Power Consumption: Operating Mode, Typical : 261.81 W
Tested with drives fully populated.
Fan : 3 x 60mm, 12VDC
System Warning : Buzzer
Max. Number of Concurrent Connections (CIFS) - with Max. Memory : 10,000
Others
|
